ActiveWrap® FlexFit Hat

By ActiveWrap - Professional Heat & Ice Wraps Since 1997

$19.99 $14.99

This great fitting Flexfit hat features quality embroidery with AW logo on front and ActiveWrap font small on the back. Keep the sun off your noggin with a clean and sharp AW lid. Size L/Xl fits most all adults.

How To Heat and How To Cool Your ActiveWrap Packs

For Cold Therapy Use:

Place ActiveWrap thermal packs flat in freezer with nylon pouch for minimum 2 hrs before using (small packs) or 4 hours for large size packs. When ready to use remove from freezer and let stand for several minutes prior to use. Ice down for max of 15 minutes per treatment. Extended time does not equal better results. * You only have to remove the pack from the nylon sleeve for heating otherwise simply toss in the freezer pouch and all for total conveinence.

*If you are using our ActiveWrap Knee,Shoulder, Hip, or Back Wraps these models are equipped with our new D.L.P. design. You can increase or decrease the heat/cold intensity by simply slipping your pack behind the D.L.P. divider located inside every pouch (See image below for detail) .

Sensitive skin individuals and/or elderly patients should opt to ice with a thin paper towel or fabric between skin and the pouch. Also if you are icing an area that is typically leaner on skin, muscle, or fat tissue, use additional caution and take care not to lean your body weight against the pack during use for prolonged periods of time.

For Heat Therapy Use (see video below):

Heating The ActiveWrap® Heat and Ice Pack

 

Remove pack from nylon sleeve and immerse in a shallow microwave safe container filled with warm/hot water (enough to cover the pack). Small Packs- Heat for  30 seconds (1200watt microwave) until pack achieves warm temperature.  Reheat in 10 sec intervals and repeat up to 1.5 min max.

Large packs heat 45 seconds in microwaves of 1200w or higher. Reheat in 10 sec intervals to achieve desired temp up to a max of 1.5 minutes.

Pack DOES NOT need to be extremely hot in order to be effective as it works in conjunction with wrap and body heat. Upon removing from microwave, empty hot water out and test pack for heat following all precautions as per each pack. Since microwaves vary, more or less time  may be required to heat to desired temperature. Increase or decrease in intervals of  10 seconds.  

Moist Heat Option- add a folded wet paper towel and insert into pouch between nylon and the pack. When using the DLP this is a nice feature as you can slip the paper towel in the top slot closest to skin and slip a heat pack underneath the moist towel in the bottom slot.

Non-Microwave Alternatives- Place packs (without the nylon cover) in hot water for 7-8 minutes time. Do not heat over an open flame or boil. Remove from water, test heat and insert into nylon pouches.

Note:  Overheating pack will  reduce the lifespan of the product. Replace ActiveWrap® packs every 2-3 years depending on usage. All Items available through activewrap.com.

The ActiveWrap® DLP Design.

Slide pack behind divider for less cold or place in front for more cold. Pack is then tucked neatly away under the envelope fold. The DLP design provides up

to a 5 degree F variance. (* DLP is currently not available in Wrist,Foot or Elbow models but coming soon).